Best Pressure Washer Turbo Nozzles in 2026: Rotary Nozzles Compared
Quick answer: The Ryobi RY31TN01 (3,300 PSI, about $30) is the best turbo nozzle for most home pressure washers with a 1/4 inch quick-connect wand. The Simpson 80156 handles up to 4,500 PSI, the Suttner ST-357 is the professional choice, and Kärcher K2 to K5 owners need the DirtBlaster wand. Never use a turbo nozzle on wood, siding or cars. We have not tested them ourselves. Last updated: October 2026.
A turbo nozzle, also called a rotary nozzle, spins a narrow zero-degree jet in a circle thousands of times a minute. You get the cutting power of a pinpoint stream spread over a wider path, which is why it clears concrete much faster than a standard tip. This guide compares current models using manufacturer and retailer specifications.
How did we choose these turbo nozzles?
We looked for nozzles with a published maximum PSI, a known fitting type and current availability from a named retailer. We also checked each maker’s stated limits, such as minimum pressure and maximum water temperature.
Turbo nozzle comparison
| Nozzle | Max PSI | Orifice | Fitting | Price |
|---|---|---|---|---|
| Ryobi RY31TN01 | 3,300 | n/a | 1/4 in quick-connect | About $30 |
| Greenworks PAQ710 | 3,100 | n/a | 1/4 in quick-connect | About $35 |
| DeWalt DXPA34TN | 3,400 | 3.0 | 1/4 in quick-connect | n/a |
| Simpson 80156 | 4,500 | 4.0 | 1/4 in quick-connect | About $47 |
| MTM Hydro 16.5001 | 4,000 | 3.0 | 1/4 in quick-connect | About $66 |
| Suttner ST-357 | 3,625 | 3.0 to 6.0 | 1/4 in threaded | About $66 to $77 |
| Kärcher DirtBlaster | K2 to K5 | n/a | Kärcher bayonet | About $40 |
Prices were checked at Home Depot, manufacturer sites and specialist retailers in October 2026.
What are the best pressure washer turbo nozzles?
1. Ryobi RY31TN01: best for most home washers
Rated for gas and electric washers up to 3,300 PSI, the Ryobi turbo nozzle uses the standard 1/4 inch quick-connect fitting, so it works on most brands and not only Ryobi. Home Depot lists it at about $30 with 4.5 stars from more than 740 reviews.
2. Simpson 80156: best for stronger gas machines
Simpson’s 4,500 PSI turbo nozzle has a 4.0 orifice, which suits gas washers of about 3,000 to 4,000 PSI and 3.5 to 4 GPM. Simpson’s similar 80144 is rated for hot and cold water up to 212°F.
3. DeWalt DXPA34TN: good match for 3,000 to 3,400 PSI washers
This DeWalt nozzle is rated to 3,400 PSI with a 3.0 orifice and a 1/4 inch quick-connect. It is for cold water only and carries a 90-day warranty. DeWalt also sells the 4,500 PSI DXPA45TN for about $46.
4. Greenworks PAQ710: best for electric washers
The Greenworks brass turbo nozzle is rated to 3,100 PSI and uses a 1/4 inch quick-connect. It is a sensible match for Greenworks and other electric washers that accept standard tips.
5. MTM Hydro 16.5001: best repairable mid-range nozzle
MTM Hydro’s 4,000 PSI turbo nozzle has a brass body with ceramic internals and can be repaired instead of thrown away. The 3.0 orifice version costs about $66.
6. Suttner ST-357: best professional nozzle
The Suttner ST-357 has a forged brass body with a ceramic orifice and seat. It is rated to 3,625 PSI and 190°F and comes in orifice sizes from 3.0 to 6.0, so you can match it exactly to your machine. It has a 1/4 inch threaded inlet, so add a quick-connect plug if your wand needs one.
7. Kärcher DirtBlaster: the one for Kärcher K-series
Kärcher’s consumer washers use a bayonet fitting, not a standard quick-connect. The DirtBlaster wand fits K2 to K5 models and costs about $40. Kärcher states it is not for delicate surfaces. See our Kärcher pressure washer review for the machines it fits.
How do you choose the right turbo nozzle size?
Turbo nozzles are sized by orifice number, the same as standard tips. The right size depends on your washer’s PSI and GPM. From General Pump’s published nozzle chart:
| Orifice | GPM at 2,500 PSI | GPM at 3,000 PSI | GPM at 4,000 PSI |
|---|---|---|---|
| 2.5 | 1.98 | 2.17 | 2.50 |
| 3.0 | 2.37 | 2.60 | 3.00 |
| 3.5 | 2.77 | 3.03 | 3.50 |
| 4.0 | 3.16 | 3.46 | 4.00 |
| 4.5 | 3.56 | 3.90 | 4.50 |
Find your machine’s PSI column, then pick the orifice whose GPM is closest to your pump’s flow. A nozzle that is too small overloads the pump. One that is too large lowers the pressure and may stop the nozzle spinning.
Also check three limits before you buy:
- Maximum PSI: the nozzle rating must be at or above your washer’s pressure.
- Minimum PSI: some professional nozzles need high pressure to spin. One General Pump model lists a 2,600 PSI minimum.
- Fitting: most washers use a 1/4 inch quick-connect. Kärcher and a few other brands use their own fittings.
Our pressure washer nozzle guide covers standard tips and colors.
Where should you not use a turbo nozzle?
A turbo nozzle concentrates a zero-degree jet, so it can cut into soft materials. Manufacturer and trade guidance is consistent:
- Do not use it on wood decks or wood siding
- Do not use it on vinyl siding or painted surfaces
- Do not use it on cars or other vehicles
- Do not use it on asphalt shingles, which lose their granules
Use it on bare concrete, brick, stone and heavy equipment. Start at least two feet from the surface and move closer slowly. Read our pressure washer safety guide before using one for the first time.
How do you look after a turbo nozzle?
- Point the gun at the ground before you pull the trigger, so the ceramic rotor seats properly
- Flush the nozzle with clean water after use, since debris is the most common cause of failure
- Do not drop it, because the ceramic insert can crack
- Check the temperature rating before using it with hot water. Ratings on the nozzles we checked range from cold water only to 212°F
What else works for cleaning concrete?
A turbo nozzle is fast on stains and edges. For large driveways, a surface cleaner gives a more even finish with fewer stripes. See our guides to the best pressure washer surface cleaners and the best pressure washers for driveways.
Frequently asked questions
What does a turbo nozzle do on a pressure washer?
It spins a zero-degree jet in a circle at high speed, giving the cutting power of a pinpoint stream across a wider path. Makers claim it can cut cleaning time by up to half on hard surfaces.
Will a turbo nozzle fit any pressure washer?
Most turbo nozzles use a 1/4 inch quick-connect and fit most gas and electric washers. Kärcher K-series machines need a bayonet-fit DirtBlaster wand.
Can a turbo nozzle damage concrete?
It can etch soft or new concrete if held too close. Start about two feet away and keep the nozzle moving.
What size turbo nozzle do I need?
Use a nozzle chart. For example, a 3,000 PSI, 2.5 GPM washer needs a 3.0 orifice, and a 4,000 PSI, 4 GPM washer needs a 4.0.
Final verdict
For most home pressure washers, the Ryobi RY31TN01 is an inexpensive, well-reviewed turbo nozzle that fits a standard quick-connect wand. Step up to the Simpson 80156 for a powerful gas machine, or the Suttner ST-357 if you want a nozzle sized exactly to your pump. Whichever you pick, keep it for hard surfaces and away from wood, siding and cars.
